Re: Intel (R) Dual Band Wireless-N 7260 issue
Indest wrote: I threw away my intel 7260N. It was utterly useless. That piece of junk would disconnect ever 5 min (with the latest driver). I now have a 7260 AC (not by choice, BIOS whitelisting forced...
View ArticleRe: Intel (R) Dual Band Wireless-N 7260 issue
Honestly, intel card may be fast, but what good is it when the drivers suc*s? Also, lets be real, if this was a driver problem it would be fixed now on both the AC and the N version of the card. In...
View ArticleRe: Very slow download/upload speed in AC7260 Wireless with Bluetooth
At my school I can connect to the 5Ghz range at 300Mbps. so you should see a lot better improvement. Since they both have 2.4 and 5Ghz Range that does me they have Dual band Routers. Most of the time...
View ArticleRe: Very slow download/upload speed in AC7260 Wireless with Bluetooth
Also just to let you know Intel has just released a new Driver Version 17.1.0.19 so you might want to go to the intel website and download and install that.
View ArticleRe: What the hell does the new drivers do to the AC radio frequency?
I have the dual band 7260N so I don't really see a difference in the radio type with the newer 17.1.x drivers. I rolled back to 16.8.0.6 which works fine but not perfect. I'm not really expecting much...
View ArticleRe: What the hell does the new drivers do to the AC radio frequency?
I wish I could. My institution will cut me off the internet if I don't update certain drivers. Intel is one of them. The old driver drops about 1x a month. Not perfect, but fu**, 12 drops a year is...
View ArticleClik here to view.
Re: Bay Trail and InTru 3D Technology
Here Baytrail can play 3D http://s10.postimg.org/ywbxhu9xl/J1900_BD3_D_ISO_MVC.jpgIntel NUC DN2820FYKH Bay Trail - Page 4 - AVS Forum
View ArticleRe: Intel AC7260 limited access after sleep
Still running v17.1.0.19. Had two days of good connections from sleep on different APs, but it will only establish a g connection. Then tonight it would not connect to the home AP without a re-boot....
View ArticleSurface Pro 3 i7 (Intel HD5000) + ASUS PB287Q can't get over 30hz
I've been trying hard over the last few days to find out why this isn't working. But I think I've finally run out of ideas.My Surface Pro 3 is attached to my PB287Q over a mini display port to display...
View ArticleRe: S3500 Series 800GB w 8MB bug!
Thank for the information .But setting security set password command fails : Input/Output error Any ideas?
View ArticleIntel HD 4000 (640x480) Resolution
Title says it all pretty much. Is there a trick to this? The custom resolution tool saves the resolution but it's not selectable in Windows nor the Intel Graphics Control Panel. The lowest resolution...
View ArticleRe: Simple demo of HD 4400 and HD 4600 screen tearing under Windows 8.1 +...
The new driver fixes the problem mostly, but not completely. Changes in the delay parameter seem to bring on red flickers. I've only been able to test on a HD 4600 system since the HD 4400 left for...
View ArticleRe: Does the supplied stock 015 BIOS normally detect/show internal HDD &...
Thanks for that advice. I realised on reading description of 'the bundle' it says 'not latest versions ... suggesting dl latest versions from the dl centre', so with the dl centre search Selection =...
View ArticleConnect to Galileo with SD card over Ethernet
Hello all, I think I'm running around in circles because I can't seem to communicate with the board over Ethernet using PuTTy. I've downloaded the compiled SD card image and have it ready. However I...
View ArticleRemote Management Unit Binary
I am new at the x86 architecture for embedded systems. I am trying to set up the Quark SoC X1000 installed in the Galileo Board from scratch. I want to develop an operating system. Long term project;...
View ArticleClik here to view.
Re: "Wifi shield not present" error
I am having this problem as well. I have an Intel® Centrino® Wireless-N 135 attached to a Galileo Gen 2 board.It has been set up as shown in the "Setting up Wireless Card" in the Makers forum.I get a...
View ArticleClik here to view.
Using an HIH-5030 humidity sensor
Here are my experiences interfacing the Honeywell HIH-5030 humidity sensor to the Galileo Generation 1 board.This is a surface mount device. That makes it a bit of challenge, at least for me. It is,...
View ArticleRe: Anyone try theTimerOne example? ISRBLINK ?
AlexT_Intel wrote: That looks strange. Since that finding, the bug was fixed, AFAICS in the sources, so you don't need to specify the second argument unless you want to have your function called less...
View Article