Re: Intel Server Board S1200V3RPL Fan speed
now it has 2 beeps, pause, 2 beeps, and says boot from recovery mode! The Intel splash screen doesn't appear
View ArticleRe: NUC Haswell reboots after shutdown
@Sylvia_Intel, @JasonHoffman Could you please forward this thread onto the engineers and provide some updates to us? The problem is so simple to replicate: With WOL enabled in BIOS, shut down the NUC...
View ArticleCan not see/connect to 5g band
I have a Intel Centrino wireless N 2230. I can not connect or see my 5g band on my dual band router. I went into Device Manager and found the Network adapter. I checked the advanced tab and there is no...
View ArticleRe: Can not see/connect to 5g band
Centrino 2230 does not have 5 GHz capability according to Intel: Intel® Wireless Product Selection Guide You can purchase Intel 7260AC or Intel Centrino 6235to get the 5 Ghz capability.I have the Intel...
View ArticleRe: Oracle VM on ESRT-2 mirror on S1200V3RPL
Hello Dan, Thanks for bringing that the link is not correct. Indeed the correct link is one posted by you.I am not using the key - that one is needed just for RAID5 as per documentation. I want to use...
View ArticleRe: D54250WYK, bios, and F2, again
The other monitor is an IIyama ProLite E2273HDS, and it is connected through HDMI. Until a week or so ago I was running version 0023 BIOS firmware, and I had exactly the same behavior for each monitor.
View ArticleRe: D54250WYK, bios, and F2, again
When I say "exactly the same behavior for each monitor" in the previous post I mean that the MB168B+ did not work with F2 and the IIyama ProLite E2273HDS did work with F2.
View ArticleRe: No Acceleration with RST, Problem found
hi , reviving the old post as my dell inspiron 15z is suffering from the same exact issue , everything seems fine until I try o accelerate the system disk and then it returns with an error which says...
View ArticleError compiling stock MonsterSketch missing SPI.h ??
Hello, I'm getting this error when compiling the stock MonsterSketch file for DataMonster. Not sure why this is happening. I had a simular problem with a missing avr/pgmspace.h that was corrected by...
View ArticleRe: Using onboard graphics together with a separate graphics card
Hi, I have doubt about the connection to display 3 different display which are 1 for pc monitor, 2 for tv and another 2 for tv. Current connection is dvi port connected to pc monitor and vga port...
View ArticleAnisotropic Filtering does not work in MS Flight Simulator 2004.
Hello, My system has an Intel Core i5-4250U with Intel HD 5000. I am running Windows 7 x64. I like to play an older game: Microsoft Flight Simulator 2004 and it seems to run pretty well on the HD 5000....
View ArticleRe: IR Power On with D34010WYK Nuc
Kelvin wrote: @Intel Community Team - Hope you can pass this feedback onto the dev's so they can create proper fixes. I don't think they would create a Fix, this Bug is alive from the Series 6 Board...
View ArticleRe: IR Power On with D34010WYK Nuc
LesMoss wrote: Its hard to imagine how that could be! Does it still survive a power disconnect? The only way I can think it would work is if Windows modified the BIOS settings.Hard to believe, but...
View ArticleHow to put D54250WYKH mSATA in IDE mode?
Hello. I am attempting to install Windows XP on my D54250WYKH from and ISO that I made of my install DVD (since I have no external drive) and is on my USB drive. When I go through the text setup for...
View Article8 MB bug causing laptop ( lenovo w520) to not boot / SSD error
Hello All, my laptop is not booting up due to intel bug 8MB 1) the bug mentioned in the link here: https://communities.intel.com/thread/24205 2) upgrading the firmware is not resolving the issue....
View ArticleIntel Galileo is not detected.
I connected the power cable to the card, I've also connected the usb cable to the computer, but I absolutely did not detect anything. I installed the driver, restart the computer with the hope of...
View ArticleCentrino 2230-N Win7 driver speed issues
Dear ladies and gentleman, i have a Lenovo Laptop with dual boot Win7 64bit and Win8.1 64bit. I also use the latest driver for WLAN on Win7 & Win8.1. When i connect to my access point where N is...
View ArticleRe: Centrino Ultimate N6300 AGN drops connections
Hi Joe, Have been using the new driver for a week and haven't been disconnected anymore. Thank you! but have to say that the new driver took too long....
View ArticleRe: Are the NUC's USB3.0 ports suitable for long-term use?
Hi Silvia, the D54250WYK has 4 external USB 3.0 ports and 2 internal headers.I'm just using the external ports, no extra HUB or internal hacks.I had a USB keyboard, mouse & mini-DVI screen...
View Article